STEAM TUBE DRYER
Standard Steam Chest
Most applications operating at nominal 150 psig steam pressures, and slight negative pressure inside the drying chamber, utilize a peripheral product discharge design, and fabricated steam chest. Dried product discharges through ports in the shell at the steam chest end of the dryer. These ports are enclosed by the discharge housing which incorporates belt seals between the stationary housing and sealing surfaces on the rotating shell to minimize air leakage into the dryer. The dryer's steam tubes are attached to the tube sheet, process side of the steam chest, and can be accessed through hand-holes on the outer surface of the steam chest. Steam is supplied to the dryer, and condensate is removed from the dryer, by means of a rotary steam joint mounted on a flange centered on a distribution chamber in the middle of the steam chest. This steam and condensate chamber contains a partition to separate and direct the flow of steam into the dryer and condensate removal. The Louisville Dryer Steam Chest design utilizes a stationary siphon to continuously remove condensate from the steam chest. The continuous operation of a stationary siphon has a much greater condensate removal capacity than gravity type condensate discharge designs.
Contact our experts today at 800-735-3163 to find out how your industry can benefit from the LOUISVILLE Steam Tube Dryer. CONTACT
CONNECT WITH US
Louisville Dryer Company | 1100 Industrial Blvd | Louisville, KY 40219 Toll Free: (800)795-3165 Fax: (502) 969-9028